Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manual do Utilizador descarregar pdf (Página 10)

19. Solder the remaining ground and -29V wire. Ground should

come in from the right side and wire 16 from the left. This is tricky

so be patient and take your time to make sure that you do not

solder the rows together and short them.

20. Insert wires 6 and 12 now. Refer to the DL pinout diagram

which can be found in the PQ manual or at the end of this guide.

The colored wire is +, the clear copper wire is -, and the silver wire

that you put clear heatshrink over is the shield.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sem comentários

Mytek-digital Private-Q DL Cable Assembly Using Canare MR202-16A Manual do Utilizador Página 10